The Docksider


Our Dock Mounted Kayak Lift Rack

Types of mounts

You can choose between a Bolt On, a Clamp On, or the ShoreMaster Dock Mount.

The Dock Surface Mount – Series 100 (Bolt On) 2 Required

  • Mounts to docks having wood or composite wood decking.
    For boat dock decking 1 to 1 1/2 inches inches thick.
  • Do not use on docks with aluminum decking.
  • 2 slots provide for vertical adjustment for water level variations.

Dock mount bolt-on

Easy Installation
  • Carefully Drill 1/2 in hole (2 for each mount) (Use a standard or Spade drill bit).
  • * Install the TOGGLER® brand SNAPTOGGLE® (2)
  • Secure with bolts (2 for each mount).
  • Assure that the kayak rack mounts are installed in structurally firm locations on your dock. Avoid cracked wood and or soft spots where puddling may occur on your dock.
* “U.S. Patent no. 6,161,999 and foreign counterparts thereof. Other patents pending. TOGGLER & typeface and SNAPTOGGLE are worldwide registered trademarks of Mechanical Plastics Corp.”

Or

The “Tool Free” Dock Mount – Series 200 (Clamp On) 2 Required

  • Underside of your dock MUST be accessible.
  • For use on docks having wood, composite wood, or aluminum decking.
  • Must have dock side height less than 7 1/2 inches.
  • Truss-type docks – must have decking to bottom rail height 10 inches or less.
  • Designed for standard dock decking thickness of 1 to 1 1/2 inch.
  • 2 slots provide for vertical adjustment for water level variations.
Mounts for the Docksider Kayak Rack and Paddle Board Rack

Clamps to your Boat Dock. Set of 2

Easy Installation

  • Locate where there are no under dock obstructions and away from any electrical lines.
  • Position “U” of dock mount under dock side board
  • Lift up and then shift to the left.
  • Position and thighten clamp on back side of dock side board

Or

The ShoreMaster Mount – Series 300 (Bolt On) 2 Required

  • This Mount provides an additional option for mounting your DockSider Lift and Dock Storage Rack to a ShoreMaster Infinity dock.
  • In addition to purchasing the DockSider Kayak/ SUP Rack, you must also purchase the Infinity Dock Accessory Connection from your ShoreMaster Dealer.
  • 2 slots provide for vertical adjustment for water level variations.

ShoreMaster Dock Mount

Easy Installation

  • Mount the angle plates to the vertical mount with screws provided.
  • Assembly the ShoreMaster Mount to the ShoreMaster Connector with screws that come with the Connector.
  • Mount to your ShoreMaster Infinity Dock in desired position and Lock with T handle.